Casio Baby G Wr10bar How To Set Time

What is the range for receiving the time scale signal?

Click the following to get reply.

Due north America

Europe

Why is the fourth dimension equally set by the time calibration signal slightly different from the time indicated past the fourth dimension signal on the Tv set, radio, etc.?

After the lookout man receives the fourth dimension calibration indicate, it performs diverse calculations to make up one's mind the current fourth dimension. These calculations can cause the time setting to be off by up to one second.

Why is the time equally set by the time scale signal one hour off?

This is considering the watch is non making allowances for Daylight Saving Time (summer). Alter the watch'south DST setting* to "Auto DST", and information technology will adapt the 60 minutes setting automatically. Note that you should turn off the DST setting if you are in an expanse where Daylight Saving Time (summer time) is not used.

* For models that do not accept the "Auto DST" setting: DST setting can but exist turned on/off manually.

Why is the fourth dimension equally set by the time scale betoken wrong?

Your Habitation City code setting is probably incorrect for your current location. Modify your Home City code so information technology matches the time zone where you are currently located.

How is the accurateness of this lookout?

Excellent. Since the picket automatically adjusts its fourth dimension setting in accord with a time calibration signal, yous are always ensured of very accurate timekeeping.

Is in that location anything I can do to better time calibration indicate reception?

The following are guidelines for point reception.

Position the watch as shown in the following illustration, with its 12 o'clock side facing towards a window. Make sure there are no metallic objects nearby.

Proper signal reception can be difficult or fifty-fifty incommunicable under the weather condition listed below.
- Inside or amidst buildings
- Inside a vehicle
- Near household appliances or office equipment, or a mobile phone
- Nigh a construction site, drome, or other sources of electric noise
- Near hightension power lines
- Among or behind mountains

Signal reception is normally better at night than during the day.
Fourth dimension calibration signal reception takes from two to five minutes, merely in some cases it can take as long as 12 minutes. Take care that you exercise non perform any push operations or move the spotter during this fourth dimension.

Caste of Water Resistance of CASIO Quartz Watches
Please familiarize yourself with CASIO's case designations, so you tin recommend the sentry nearly suitable to a customer's needs

*Only watches marked with the words "DIVER'Southward Lookout 200M" can be worn while scuba diving (with air tanks).
**Even if a lookout man is water-resistant, do not operate its buttons or crown while it is submersed in h2o or wet. Even so, "DIVER'S WATCH 200M"casing models permit underwater button functioning.
***After submersion in seawater, utilise plain water to rinse all salt and clay from the watch.
****Fifty-fifty if a sentry is water-resistant, avoid wearing information technology in the bathroom or in areas where detergents (soap, shampoo, etc.) are being used. Such weather tin reduce water resistance.